View CX-6SC-SM210A_4262944.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CX MINIATURE CRYSTALS
800kHz to 1.35MHz ULTRA-LOW PROFILE MINIATURE SMD CRYSTAL
EUROQUARTZ
Telephone: +44(0)1460 230000 Fax: +44(0)1460 230001 Email: sales@euroquartz.co.uk Web: www.euroquartz.co.uk
CX-6V-SM
Page 1 of 2
General Description
The CX-6-SM quartz crystals are leadless devices designed for surface mounting on printed circuit boards or hybrid substrates. The crystals are intended for use in Pierce oscillators. Hermetically sealed in a miniature ceramic package, the crystals are produced utilizing a photo-lithographic process ensuring consistent high quality production units.

Ultra-low profile (1mm) Extensional mode Ideal for use with microprocessors Designed for low power applications Compatible with hybrid or PCB packaging Low ageing Full military environmental testing available Ideal for battery operated applications
Specification
800kHz to 1.35MHz Extensional A 0.05% (500ppm B 0.1% C 1.0% 7pF Load Capacitance: 5kW max. Motional Resistance (R): 1.2fF Motional Capacitance (C): 150k Quality Factor (Q): 1.0pF Shunt Capacitance (C): 3mW max. Drive Level: 35C Turning Point (T)**: -0.035ppm/C2 Temperature Coefficient (k): Note: frequency (f) deviation from frequency (f0) at turning point temperature = f-fo k(T-To) = fo 5ppm max. Ageing, first year: 1000g peak, 0.3ms, 1/2 sine Shock, survival: 10g rms 20-1,000Hz random Vibration, survival: -10~+70C (commercial) Operating Temperature: -40~+85C (industrial) -55~+125C (military) -55C~+125C Storage Temperature: 260C for 20 sec. Process Temperature: Frequency Range: Functional Mode: Calibration Tolerance*: Specifications are typical at 25C unless otherwise indicated. * ** Closer calibration available Other Turning Point available
D
(TO P)
A D
Outline
B
C
CX-6-SM Package Dimensions
Dimension Typical (mm) Maximum (mm)
A B C D
Dimension "C"
6.73 2.62 1.27
Glass Lid (mm max.)
7.11 2.90 see below 1.52
Ceramic Lid (mm max.)
SM1 SM2 SM3
0.99 1.04 1.12
1.35 1.40 1.47
Equivalent Circuit
L R
1
C C
2
R Motional Resistance
L Motional Inductance
C Motional Capacitance C Shunt Capacitance
CX MINIATURE CRYSTALS
800kHz to 1.35MHz ULTRA-LOW PROFILE MINIATURE SMD CRYSTAL
EUROQUARTZ
Telephone: +44(0)1460 230000 Fax: +44(0)1460 230001 Email: sales@euroquartz.co.uk Web: www.euroquartz.co.uk
CX-6V-SM
Page 2 of 2
Conventional HCMOS Pierce Oscillator Circuit
Circuit Design
Typical Pierce Oscillator Application
The low profile CX miniature surface-mount crystal is ideal for small, battery operated portable products. The CX crystal designed in a Pierce oscillator (single inverter) circuit has a very low current consumption with high stability. A conventional HCMOS Pierce oscillator circuit is shown below. The crystal is effectively inductive and in a Pi network with C1 and C2 which provides the additional phase-shift necessary to sustain oscillation. The oscillation frequency (f0) is 15ppm to 150ppm above the crystal's series resonant frequency (FS).
RB Amplifier
Buffer Osc. Freq. (Fo)
C5
R)
C
CX-2
C
Drive Level
Solder Pad Layout
1.78 3.05 5.46
RA is used to limit the crystal's drive level by forming a voltage divider between RA and C1. RA also stabilizes the oscillator against changes in the amplifiers output resistance (R0). RA should be increased for higher voltage operation.
Load Capacitance
The CX crystal calibration tolerance is influenced by the effective circuit capacitances, specified as the load capacitance (CL.) CL is approximately equal to: C x C2 CL = 1 C C1 + C2 + S
Terminations
Designation Termination
NOTE: C1 and C2 include stray layout capacitance to ground. CS is the stray shunt capacitance between the crystal terminals. In practice, the effective valus of CL will be less than that calculated from C1, C2, and CS values due to the effect of the amplifier output resistance. CS should be minimized. The oscillation frequency (f0) is approximately equal to:
SM1 SM2 SM3
Gold Plated Nickel, Solder Plated Nickel, Solder Plated and Solder Dipped
f 0 = f S 1+
C1 2(C0 + CL )
Where FS = Series resonant frequency of the crystal C1 = Motional Capacitance C0 = Shunt Capacitance
Packaging
CX-6V-SM- Tray Pack (Standard) - 16mm tape, 178mm or 330mm reels (Optional) per EIA 481
Order Code
CX-6
C = Ceramic Lid Blank = Glass Lid Frequency
-SM1
SM1 SM2 SM3
1.0MHz
(A
/
I
)
"S" if special or custom design Blank if standard
Calibration Tolerance* @ 25C A, B, C *For other calibration tolerances enter figure in ppm
Temperature Range: C = Commercial I = Industrial M = Military S = Specify

▲Up To Search▲

Price & Availability of CX-6SC-SM210A

	To Download CX-6SC-SM210A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .